Garmin GPS device provides accurate route information and also provides information about current routes and places directly from satellites.
You can rely on the device while you are traveling in an unknown place. It also saves all the route information for future use.
Users usually face many Garmin GPS problems while using their GPS on an old version. It is necessary to keep updating your device with Garmin map updates as maps help devices to function normally.
Sometimes due to technical problems while using Garmin GPS and as the result, Garmin memory full errors occur. But you can fix it just by performing simple troubleshooting methods.
Troubleshoot Methods to Resolve Garmin Memory Full Error:
1. Restart the device:
A simple restart can resolve many errors in the device. Turn off your device and wait for some seconds and then turn on the device again. It helps you in fixing memory full errors in the GPS device.
Steps to restart the device:
Locate the reset button.
Push the button.
Slide the power key.
2. Hard reset to fix Gramin memory full problem:
Before starting, disconnect your device from the system.
Connect the device to the power socket and turn it off and then wait for 4-5 minutes before restarting.
Then press the power button to restart and when the device is turning on press and hold the right bottom corner of your screen for 3-4 seconds.
Then a pop-up appears on the screen with a hard reset option.
This hard reset option will reset the device and by erasing all the data of the device it brings to the factory settings.
Press yes to confirm and wait for the process to complete.
And now check whether the error is fixed or not.
3. Delete archive files:
Every GPS device can archive the files. Archive files can consume memory space that leads to Garmin memory full error.
We did not notice this because it stays in the back end, by deleting those files you can easily fix this error.
For Windows:
Firstly with the help of Gramin Express link your GPS device to your system. You can easily download it from the app store and Garmin website.
Then go to the ”C” drive and search for the GPS folder and then open it after connecting your device to the computer.
Click twice on the GPS folder and look for the Archive folder. Open it and select the whole content by pressing “ctrl A” and the press delete button.
Restart the device and check whether the issue is fixed or not.
For Mac:
The whole process is the same for Mac. You just require the Garmin Express app to connect with the Mac system. After that go to the GPS drive and follow the above steps to delete Archive files from the device.
Sum up:
Follow these steps to fix the Garmin memory full error. Certainly, this will help you to get rid of the memory full error of GPS.
Sometimes Garmin memory full error occurs when your Garmin GPS is suffering from some internal technical issue and it is hard to fix without expert guidance.